Correct torque on every screw
A controlled screwdriver finishes every rundown within the same torque and angle window.
05 · Solutions
A screwdriving robot picks a screw from a feeder, tightens it to a defined torque and angle, and logs the result of every rundown. Coborel Robotics integrates Dobot collaborative robots with an electric screwdriver, screw feeder and, where needed, machine vision to give consistent joints on electronics and appliance assembly lines.
Screwing
Cobots are improving screw fastening with abilities like high torque that enhance accuracy, stability and compatibility. They optimize electronic product assembly lines.
A controlled screwdriver finishes every rundown within the same torque and angle window.
Rundowns outside the torque or angle window are flagged immediately and the part is rejected.
Results can be stored with the serial number and passed to your MES or quality system.
The cobot can work beside the operator who handles the other assembly steps.
We define screw types, torque values, number of screw points, product variants and line takt.
We select a suitable electric screwdriver and a vacuum or blow-feed screw supply method.
We design a fixture to hold the product and add machine vision to locate holes if position tolerance is wide.
We program screw sequence, approach moves and torque recipes, and pass result data to your line.
We do the risk assessment, set speed and force limits for the shared station and commission it.
Dobot CR5A is a general-purpose 6-axis collaborative robot with a 5 kg payload and 900 mm reach.
Dobot Nova 5 is a compact 6-axis collaborative robot with a 5 kg payload and 850 mm reach.
Dobot CR3A is an industrial 6-axis collaborative robot with a 3 kg payload and 620 mm reach.
Coborel Robotics installs compact Dobot cobots at electronics manufacturers for small-screw assembly, board and module loading, test station tending, dispensing and visual inspection.
ExploreCoborel Robotics builds Dobot cobot cells for home appliance makers and their suppliers, covering screwdriving, adhesive and sealant dispensing, part feeding and vision inspection.
ExploreCoborel Robotics commissions Dobot cobots at automotive suppliers for CNC and press tending, screwdriving, welding, gluing and vision-based quality inspection.
ExploreThe robot model, screwdriver and controller, number of feeders (different screw types), fixture and any vision. Sending result data to your MES can also be added to the scope.
It depends on screw length, rundown speed, distance between screw points and the feeding method. We test on your product to show whether it fits your takt.
Yes, with bit changing, multiple screwdrivers or several feeders. The right method depends on the screw mix and takt.
If fixture tolerance is not enough, a camera measures the hole position and corrects the robot path. We decide this from measurements on sample products.
Screwdriving is a good collaborative use case, but every project still gets a risk assessment based on ISO 10218 and ISO/TS 15066. The bit and pinch points are assessed and speed and force limits set accordingly.
Contact
Tell us about your process and we will reply with a free pre-feasibility and application proposal.