Spraying

What you gain

Spraying is one of the top cobot applications. Cobots enhance spray painting processes with their precision and ability to perform multiple techniques autonomously. They ensure supervision of hazardous activities and that quality standards are met.

  • Spray painting
  • Coating
  • ATEX option
01

Consistent film thickness

Constant gun distance, speed and overlap give a more uniform coat from part to part.

02

Less paint waste

The gun triggers only over the part, reducing overspray and excess coats.

03

Operator away from solvent vapour

The robot takes over repetitive work inside the booth while the operator handles preparation and inspection.

04

Easy colour and program changes

Stored programs per part allow quick changes between products.

How it works

  1. 01

    We review paint or coating type, solvent content, part geometry, target film thickness and your existing booth.

  2. 02

    Based on the hazardous zone classification we choose the protection method: a protective robot cover, suitably certified equipment, or placing the robot outside the zone.

  3. 03

    We connect the gun, paint supply, pressure and trigger control to the robot and plan part presentation with hangers, a turntable or a conveyor.

  4. 04

    We teach spray paths and verify film thickness and appearance with you on test parts.

  5. 05

    We assess robot motion and process risks, commission the cell and train your team on maintenance and cleaning.

When it fits

  • Small and mid-size parts within robot reach
  • Water-based paints, primers, varnishes and similar coatings
  • Repeat geometry and batch production
  • Lines facing quality variation or staffing gaps in manual painting

Frequently asked questions

Can a cobot be used with solvent-based paint?

Standard cobots are not certified for explosive atmospheres on their own. For solvent-based paints we evaluate options such as protective covers, suitable equipment or placing the robot outside the hazardous zone at the start of the project, and we tell you plainly if no suitable solution exists.

What drives the price of a painting robot?

The robot model, gun and paint supply, ATEX requirements, booth adaptation and part presentation equipment. Being able to reuse your existing booth has a major effect on cost.

What does cycle time depend on?

Painted surface area, number of coats, gun flow rate and how the part is presented. We run trials on test parts to establish a realistic figure.

Won't the robot get covered in paint?

The robot body is protected by a replaceable cover. Changing the cover and cleaning the gun are part of the maintenance routine we hand over at commissioning.

Who does the programming?

Spray paths can be taught by hand guiding and a graphical interface. We commission together with your lead painter so their experience goes into the program.

Contact

Where does a cobot fit in your line?

Tell us about your process and we will reply with a free pre-feasibility and application proposal.

Call WhatsApp Start a project