Small, delicate parts
Tiny screws, connectors and boards need care, and fatigue increases assembly errors.
Industries
Coborel Robotics installs compact Dobot cobots at electronics manufacturers for small-screw assembly, board and module loading, test station tending, dispensing and visual inspection. Lightweight models such as Nova and CR3A fit on a bench and are integrated to work with your existing test equipment.
Tiny screws, connectors and boards need care, and fatigue increases assembly errors.
Products change often, which makes long-lived fixed automation a hard investment.
Operators waiting at the fixture while a functional test runs is lost time.
Drives housing and board screws with an auto-feed screwdriver and logs the torque result.
Loads the board or module into the test fixture and sorts pass and fail units.
Applies adhesive, thermal paste or conformal coating at programmed points.
Uses a camera to check connectors, labels and missing components.
High torque, accuracy and electronics assembly compatibility.
Explore 07Comprehensive one-touch inspection with advanced sensors.
Explore 06Precise, consistent beads on every single part.
Explore 03Multi-task tending for packaging lines and machines.
ExploreCompact Dobot models are designed for light assembly. With very small screws, success depends on pairing the robot with a screw feeder, a fixture and, where needed, camera-based position correction.
Yes. The cobot exchanges start and result signals with the tester, or communicates through a software interface where needed. The method depends on your equipment.
The cell and grippers are designed with materials and grounding that meet your ESD requirements, which we define together during the survey.
Nova 2 or Nova 5 for light benchtop work, and CR3A for slightly higher payloads and industrial use.
Contact
Tell us about your process and we will reply with a free pre-feasibility and application proposal.