The same weld on every part
Constant torch angle, speed and stick-out keep bead appearance and penetration consistent across shifts.
02 · Solutions
A welding robot carries the torch along a programmed seam at a constant speed and angle. Coborel Robotics integrates Dobot collaborative robots with the welding power source, torch and fixture; your welder teaches seam points by hand guiding, so small and mid-size batches can be automated economically.
Welding
Cobots are changing welding by performing tasks like stainless steel laser welding. They ensure high precision and stability even in small workspaces. Productivity increases and costs are reduced with robotic assistance.
Constant torch angle, speed and stick-out keep bead appearance and penetration consistent across shifts.
Points are taught by hand guiding, turning an experienced welder's know-how into robot parameters.
Short programming time keeps the robot useful even with frequently changing part families.
The operator focuses on preparation and part changes, with less exposure to arc light and fumes.
We review material, thickness, joint types and your existing weld procedures, and take sample parts for trial welds.
We select a power source, torch, wire feeder and, if needed, a torch cleaning station that communicate with the robot.
We design a fixture that locates the part repeatably and, where useful, a two-station table to take loading out of the cycle.
We teach seam paths and weld parameters and approve the welds with you on sample parts.
We assess arc light, fumes and robot motion, define curtains and extraction, then commission the cell.
Dobot CR10A is a 6-axis collaborative robot with a 10 kg payload and 1,300 mm reach.
Dobot CR5A is a general-purpose 6-axis collaborative robot with a 5 kg payload and 900 mm reach.
Dobot CR20A is a 6-axis collaborative robot with a 20 kg payload and 1,700 mm reach.
Coborel Robotics commissions Dobot cobots in metalworking and sheet metal plants for welding, CNC and press brake tending, grinding, deburring and cutting.
ExploreCoborel Robotics commissions Dobot cobots at automotive suppliers for CNC and press tending, screwdriving, welding, gluing and vision-based quality inspection.
ExploreCoborel Robotics builds Dobot cobot cells for home appliance makers and their suppliers, covering screwdriving, adhesive and sealant dispensing, part feeding and vision inspection.
ExploreThe main items are the robot model, process (MIG/MAG, TIG or laser), power source and torch, the number and complexity of fixtures, and fume extraction and curtains. Whether your existing power source is robot-ready also changes the cost.
Often yes, if it has a robot interface and a communication option. We check your model during feasibility and suggest an alternative if it is not suitable.
Seam points can be taught by hand guiding the robot, with no coding. We train your welders and maintenance team during commissioning.
It depends on total seam length, travel speed, torch repositioning and how parts are loaded. We run trials on sample parts to establish a realistic figure.
Collaboration is possible in terms of robot motion, but arc light, spatter and fumes are separate hazards. Welding curtains, extraction and area guarding are defined by a risk assessment based on ISO 10218 and ISO/TS 15066.
Contact
Tell us about your process and we will reply with a free pre-feasibility and application proposal.