Cutting

What you gain

Cobots are doubling the productivity of precision-cutting applications, delivering the same contour quality on every part across laser, ultrasonic and milling processes.

  • Laser cutting
  • Ultrasonic
  • Deburring
01

Cutting on 3D parts

The robot follows inclined and curved surfaces, cutting contours a flatbed machine cannot reach.

02

A program instead of a die

Switch to a new part by changing the program rather than building a trim die or special tooling.

03

The same contour every time

Constant speed and focal distance keep edge quality consistent part to part.

04

The right method per material

Laser for metal, ultrasonic knife or milling for plastics and composites are all evaluated.

How it works

  1. 01

    Using samples we review material, thickness, cut contours, edge quality expectations and part variants.

  2. 02

    We choose laser, ultrasonic or milling for the material and size the laser source and cutting head together with the robot.

  3. 03

    We design a fixture that holds the part and leaves the cut line clear, plus a turntable if needed.

  4. 04

    We create the cut path from CAD data or by teaching, and tune focus, speed and power on samples.

  5. 05

    We carry out a risk assessment covering a laser-safe enclosure, interlocked doors and fume extraction, then commission the cell.

When it fits

  • Trimming and piercing deep-drawn, hydroformed and bent sheet parts
  • Gate, flash and edge cutting on injection-moulded and composite parts
  • Batches with many variants where die costs stay high
  • Part sizes within the robot's reach

Frequently asked questions

Can a cobot work alongside an operator during laser cutting?

No, not while cutting. Industrial cutting lasers are a serious eye and skin hazard, so the cell runs inside a laser-safe enclosure; here the cobot's advantage is its compact size and easy programming.

What drives the price of a laser cutting robot?

The laser source and power, cutting head, laser-safe enclosure, fixtures, fume extraction and robot model. Choosing ultrasonic or milling instead changes the cost structure.

What does cycle time depend on?

Total cut length, material thickness, laser power, number of holes and direction changes along the contour. We run trial cuts on sample parts to establish a realistic figure.

Will cutting accuracy be good enough?

It depends on robot path accuracy, fixture repeatability and the part's own dimensional variation. We take your tolerance requirement up front and verify it by measuring samples.

Who prepares the program for a new part?

Cut paths can be generated from CAD data or taught by hand guiding. At commissioning we train your team to set up new parts and tune parameters.

Contact

Where does a cobot fit in your line?

Tell us about your process and we will reply with a free pre-feasibility and application proposal.

Call WhatsApp Start a project