Industry challenges

01

Ergonomically demanding assembly

Leaning into cabinets to drive screws or carrying heavy panels is tiring and repetitive for operators.

02

Model variety

Products of different capacities and designs run on the same line, so stations must adapt quickly.

03

Consistent quality

A missing screw, a broken adhesive bead or a missing part may go unnoticed until final inspection.

Where cobots help

01

Screwdriving station

Drives panel, hinge and cover screws with torque control and records each result.

02

Adhesive and sealing

Applies gasket, foam or adhesive along a programmed path at a constant thickness.

03

Part feeding

Loads and unloads parts at press, injection or bending machines and feeds them to the assembly line.

04

Visual inspection and palletizing

Checks labels and assembly with a camera, and stacks supplier parts into crates or onto pallets for shipping.

What to consider

  • Line takt: On moving lines, conveyor tracking or a stop-and-go station is chosen based on cycle time.
  • Reach: Arm reach and tool length are assessed together for access inside cabinets.
  • Records and traceability: Torque and inspection results can be linked to the product serial number.
  • Sharing space with operators: The cobot’s work zone is planned so it does not conflict with operator movements.

Frequently asked questions

Can a cobot be added to an existing assembly line?

Yes. Thanks to their compact size, cobots can often be added without major changes to the station layout. Takt, reach and safety are assessed together during the site survey.

Can it work on a moving conveyor?

Depending on the application, conveyor tracking or a short stop at the station is used. Line speed and process time determine which fits.

How are different product models handled?

Each model gets its own program and, if needed, gripper setting stored as a recipe. At changeover the recipe can be selected automatically from a line signal or barcode.

Which Dobot model suits assembly?

CR5A is often chosen for light tasks such as screwdriving and gluing, CR10A for heavier part feeding and CR20A for palletizing. The final choice depends on payload, reach and tool weight.

Contact

Where does a cobot fit in your line?

Tell us about your process and we will reply with a free pre-feasibility and application proposal.

Call WhatsApp Start a project