General

What is a cobot?

A cobot (collaborative robot) is an industrial robot arm designed to work safely in the same space as people. With force limiting, collision detection and hand guiding, and a proper risk assessment, it can often run without a safety fence.

What are cobots used for?

Palletizing, machine tending, loading and unloading, screwing, gluing, painting, welding, grinding, cutting and vision-based inspection are the most common applications. Repetitive, ergonomically demanding or quality-critical tasks are the best candidates.

What is the difference between a cobot and an industrial robot?

Industrial robots are built for high speed and heavy payloads and usually run in fenced cells. Cobots can share space with people, are easier to program and can be redeployed. Cycle time, payload and the risk assessment determine the choice.

Do you need programming skills to use a cobot?

Not for basic tasks. With hand guiding and a graphical interface, a trained operator can teach new points and simple task flows. Vision and line integration still need engineering support.

Cost and investment

How much does a cobot cost?

The cost of a working cell depends more on the application than on the robot arm: gripper, safety, software, vision and integration scope differ in every project. We prepare a project-specific quote after reviewing your process.

When does a cobot investment pay back?

The payback period is the total investment divided by the annual net benefit. Number of shifts, labour cost at the station and quality gains affect the result directly. Use our ROI calculator for a first estimate with your own numbers.

Are there incentives or grants for cobots in Turkey?

Turkey has support types such as KOSGEB programs, investment incentive certificates, development agency programs and TÜBİTAK TEYDEB for R&D projects. Programs and conditions change periodically, so verify current details with the relevant institution.

What information should I prepare for a quote?

Part dimensions and weights, product mix, target cycle time, number of shifts and floor space are a good start. A short video of the process and a layout drawing speed up the assessment.

Safety

Does a cobot need a safety fence?

Often not, if the risk assessment reaches an acceptable result. Sharp tools, high speeds or heavy loads may require an area scanner, light curtain or partial guarding. The decision is made for each cell separately.

Which standards apply to cobot safety?

The core standards are ISO 10218-1 (robot), ISO 10218-2 (robot system and integration) and ISO/TS 15066, which describes collaborative operation modes. Risk assessment follows ISO 12100, and the performance level of safety functions follows ISO 13849-1.

Does a cobot cell need CE marking?

Yes. In Turkey a working robot cell goes through conformity assessment as a machine under the Machinery Safety Regulation (2006/42/EC). Risk assessment, a technical file, a declaration of conformity and the CE mark are part of that process.

What happens if a cobot hits a person?

The cobot detects unexpected contact from changes in force and current and stops or backs off. In power and force limiting applications, contact forces are set to stay below limits defined per body region and are verified by measurement.

Installation and service

How does a cobot project run?

It runs in six steps: discovery and analysis, concept and simulation, design and build, FAT, installation and SAT, and service. Reach, cycle time and safety are verified in simulation and workshop testing before the cell reaches your site.

Do we need to stop production for installation?

In most projects a short, planned stop is enough, because the cell is tested beforehand at the factory acceptance test. Line connections and the changeover plan are scheduled together around your production calendar.

Do you train our operators?

Yes. During commissioning we train your operators and maintenance staff in operation, point adjustment, basic troubleshooting and safe working. Extra training can be planned for new staff or new products.

Is service support available after installation?

Yes. We offer remote support, preventive maintenance, spare parts and program updates for new products. Service scope is agreed per project.

About Coborel

Who is Coborel Robotics?

Coborel Robotics is the cobot and robotic automation brand of ORELSIS Bilişim. It runs cobot projects with one team, from feasibility and design to software, commissioning and service.

Where do you operate?

We are based in Kadıköy, Istanbul. We provide discovery, installation and service across Turkey.

Which robots do you work with?

We use Dobot collaborative robots: the CR series for industrial production and the lightweight, compact Nova series for lighter tasks. The model is selected for the payload and reach the application needs.

Which languages do you work in?

We work in Turkish and English. Quotes, technical documents and training can be prepared in both languages.

How do I get started with Coborel?

Describe your process briefly through the contact form on the site, and we will reply with a free pre-feasibility study and application proposal. You can also reach us by phone or WhatsApp at +90 530 320 76 00.

Contact

Where does a cobot fit in your line?

Tell us about your process and we will reply with a free pre-feasibility and application proposal.

Call WhatsApp Start a project