The same inspection on every part
The camera looks from the same point every time, so results do not depend on operator attention or fatigue.
07 · Solutions
An inspection robot moves a camera, 3D scanner or probe to defined poses around a part, making inspection automatic and repeatable. Coborel Robotics integrates Dobot cobots with machine vision systems; each part is checked from the same angle and distance, and the result is stored against its serial number.
Inspecting
Cobots speed up quality control through automated, comprehensive examination. They utilize advanced sensors for optimal results and streamline the process with a one-touch operation.
The camera looks from the same point every time, so results do not depend on operator attention or fatigue.
The robot carries one camera to different faces, a flexible alternative to fixed multi-camera setups.
Images and results are kept per part and can be passed to your quality system.
Inspection poses and criteria for a new variant are updated in the program.
Using sample parts we define the defects you look for (scratches, missing parts, dimensions, labels, colour), tolerances and target takt.
We select a 2D camera or 3D scanner, lens and lighting for the defect and set up a layout that keeps lighting stable.
We design the inspection poses the robot moves the camera through and, if needed, a gripper that turns the part.
We tune the vision algorithm with good and bad samples and connect reject and sorting logic to your line.
We do the risk assessment, pass result records to your MES or quality system and commission the cell.
Dobot Nova 5 is a compact 6-axis collaborative robot with a 5 kg payload and 850 mm reach.
Dobot CR5A is a general-purpose 6-axis collaborative robot with a 5 kg payload and 900 mm reach.
Dobot CR3A is an industrial 6-axis collaborative robot with a 3 kg payload and 620 mm reach.
Dobot Nova 2 is a compact 6-axis collaborative robot with a 2 kg payload and 625 mm reach.
Coborel Robotics commissions Dobot cobots at automotive suppliers for CNC and press tending, screwdriving, welding, gluing and vision-based quality inspection.
ExploreCoborel Robotics installs compact Dobot cobots at electronics manufacturers for small-screw assembly, board and module loading, test station tending, dispensing and visual inspection.
ExploreCoborel Robotics applies Dobot cobots at pharma and cosmetics producers for feeding bottles, tubes and cartons, checking labels and serial numbers, cartoning and moving laboratory samples.
ExploreCoborel Robotics installs Dobot cobots at plastic injection plants for part removal, sprue and flash trimming, visual inspection, insert loading and boxing.
ExploreCamera, lens, lighting and vision software matter as much as the robot model. 3D scanning, high resolution and sending results to a quality system widen the scope.
Typical examples are missing parts, wrong assembly, dimensional deviation, label and print errors, and visible scratches or stains. Detectability depends on defect size, contrast and surface, which we demonstrate with your samples.
It depends on the number of poses, robot moves between them, and image capture and processing time. We take your target takt up front and plan poses and hardware to match.
We tune the algorithm with good and bad samples and agree the criteria for borderline cases with you. We train your team so criteria can be adjusted after commissioning.
The robot and camera receive a part-ready signal from the line PLC and send the result to the reject mechanism and optionally your MES. We connect via the I/O or protocol your line supports.
Contact
Tell us about your process and we will reply with a free pre-feasibility and application proposal.