Clean, controlled filling
The nozzle is inserted at the same angle every time, reducing drips and overfill.
08 · Solutions
A refueling robot opens the filler cap of a vehicle or machine, inserts the nozzle, fills and closes the cap again. Coborel Robotics integrates Dobot cobots with vision-based filler neck location and custom grippers, and assesses explosive-atmosphere (ATEX) requirements at the very start of the project.
Fueling
Cobots are demonstrating refueling vehicles through contamination-free transfer. They open and close caps and refuel efficiently.
The nozzle is inserted at the same angle every time, reducing drips and overfill.
Vision measures deviations in vehicle or machine position and corrects the robot path.
Cap, plug and filler neck handling happen automatically within the same cycle.
Fill quantity and time can be recorded with the vehicle or machine ID.
We define vehicle or machine types, filler neck geometry, cap mechanism, fluid type and stopping position tolerance.
We assess the hazardous zone classification and decide the position of the robot and electrical equipment and the protection method accordingly.
We design a custom gripper for the cap and nozzle and add a camera to locate the filler neck.
We set up signals with the filling system, flow and overfill control, and program the filling sequence.
We carry out a risk assessment based on ISO 10218 and ISO/TS 15066 together with process hazards, and commission with on-site tests.
Coborel Robotics commissions Dobot cobots at automotive suppliers for CNC and press tending, screwdriving, welding, gluing and vision-based quality inspection.
ExploreCoborel Robotics commissions Dobot cobots in logistics centres and warehouses for case palletizing, depalletizing, mixed-pallet building and barcode reading.
ExploreStandard cobots are not certified for explosive atmospheres on their own. Depending on the zone classification we evaluate placing the robot outside the zone or suitable protection methods; this assessment is the first step of the project.
The robot model, custom cap and nozzle gripper, vision, filling system integration and explosive-atmosphere measures. The number of different vehicle types also increases scope.
Robot moves are short; total time is mostly set by fill volume and pump flow rate. Vehicle positioning and the cap mechanism add to it.
Separate programs and, if needed, extra grippers are set up for models with different filler positions and cap types. The camera corrects position deviations within a model.
Refueling is less common than welding or palletizing and is engineered per project. We therefore keep feasibility and prototyping thorough and verify the result with you on site.
Contact
Tell us about your process and we will reply with a free pre-feasibility and application proposal.