Industry challenges

01

Waiting at the machine

Assigning an operator to every machine for part removal and finishing is hard, especially on night shifts.

02

Frequent mould changes

With many moulds, fixed take-out devices need adjustment at every changeover.

03

Cycle consistency

Manual part removal varies the cycle time, which can affect part quality and mould temperature.

Where cobots help

01

Part removal

Picks the part when the mould opens and places it on a conveyor or at a finishing station.

02

Sprue and flash trimming

Presents the part to a cutting fixture, or removes flash and sprue with a tool.

03

Insert loading

Places metal inserts or labels in the mould to automate in-mould processes.

04

Inspection and boxing

Checks short shots and visual defects with a camera and places good parts into boxes or crates.

What to consider

  • Machine communication: The injection machine’s robot interface (for example EUROMAP signals) is defined in the cell design.
  • Mounting: The cobot can be mounted beside the machine, on a pedestal or on a mobile cart; mould access is checked.
  • Gripper: A vacuum, mechanical or custom gripper is designed for the part and can be swapped with the mould.
  • Hot parts: The temperature of parts leaving the mould is considered when choosing gripper materials.

Frequently asked questions

Which injection machines can a cobot connect to?

Most injection machines with a robot interface can be connected using digital signals. Your machine’s make and model are checked during the site survey.

Why a cobot instead of a linear robot?

Besides part removal, a cobot can also do finishing tasks such as trimming, inspection and boxing, and can be moved to another machine. For very fast cycles a linear robot may suit better; we choose based on cycle time.

What happens at a mould change?

A robot program and gripper definition are stored for each mould. At changeover the program is selected and the gripper is swapped with a quick coupling.

Which model fits?

CR5A is usually chosen for light parts, and CR10A for heavier parts or large machines that need longer reach.

Contact

Where does a cobot fit in your line?

Tell us about your process and we will reply with a free pre-feasibility and application proposal.

Call WhatsApp Start a project