What is the main difference between an industrial robot and a cobot?

The main difference is how the robot coexists with people. A traditional industrial robot works alone inside a guarded cell; when an operator enters, the robot is stopped. A cobot is designed to share the workspace with operators under conditions defined by the risk assessment.

This difference leads to different choices in speed, payload, programming and layout.

Robot vs cobot comparison table

The table shows general tendencies; there are exceptions depending on model and application.

CriterionIndustrial robotCobot
Working with peopleUsually fenced, separated from peopleShared space, subject to risk assessment
SpeedCan reach very high speedsLimited in collaborative mode
PayloadWide range, light to very heavyLight and medium loads
ProgrammingUsually needs a specialist programmerHand guiding and graphical interface
LayoutFixed cell, larger footprintCompact, redeployable
Safety equipmentFences, interlocked doors, light curtainsBuilt-in force limiting, extra sensors if needed
Typical useHigh-volume, stable productionFlexible, high-mix production

When should you choose a cobot?

  • When the operator needs to work at the same station as the robot.
  • When product mix is high and batch sizes are small.
  • When floor space is tight and a fenced cell will not fit.
  • When the robot will be moved between stations.
  • When your own team should make simple program changes.

When is a traditional industrial robot a better fit?

  • When the cycle time target is far below collaborative speed limits.
  • When the payload exceeds cobot capacity.
  • When the process uses sharp, hot or hazardous tools and human contact must be excluded.
  • When production is high-volume and stays unchanged for a long time.

Can cobots run fast without a fence?

Yes, some applications use a hybrid approach. With speed and separation monitoring through an area scanner, the cobot runs faster when nobody is nearby and slows down or stops when someone approaches. This is one of the collaborative operation modes described in ISO/TS 15066.

We decide together which approach fits during the cell concept and risk assessment phase.

Frequently asked questions

Will cobots replace industrial robots?

No, the two technologies complement each other. Industrial robots lead where high speed and heavy payloads are needed. Cobots have the edge where flexibility, close work with people and fast commissioning matter.

Are cobots slower?

In collaborative mode, where contact with a person is possible, speed is limited. With methods such as speed and separation monitoring, the cobot can run faster while nobody is nearby. The real cycle time should be verified in simulation.

Can a cobot lift heavy loads?

Cobots are designed for light and medium loads; higher-payload models are used in tasks such as palletizing. The payload calculation includes not only the part but also the gripper weight and centre of gravity.

Should I replace my existing robot cell with a cobot?

Replacing a cell that works and meets demand is rarely necessary. Consider cobots especially for new stations, lines with frequent product changes, or points where people and robots need to work together.

Contact

Where does a cobot fit in your line?

Tell us about your process and we will reply with a free pre-feasibility and application proposal.

Call WhatsApp Start a project